Position :
Home » Products » Plastic Round Road Stud Light for Garden B1

Plastic Round Road Stud Light for Garden B1

Body material: PC(Japan Brand)
Warranty: 12 Months
Power supply:  USA Brand Flexible High Efficient Solar Panel 5V/0.4W
Visual distance: > 800m
Load Bearing: 20 Tons
Working Mode: Flashing or Constant
Waterproof: IP68
Shank: Without shank

Share:
Introduction

Plastic Round Road Stud Light Features

  • High brightness America brand led with 100000 hours of working time.
  • USA brand solar panel. 22% high conversion rate. Fast charge rate.
  • Japan brand Anti-UV PC case.
  • The LED lights of pc Road Stud Light come on automatically as soon as it starts getting dark every night.
  • Cost-effective, Road Stud Lights are easy to install and require absolutely no wires or maintenance.
  • Most quality Epoxy resin glue to fix the solar cat eyes Road Stud Light, making sure of solar power charge.
  • Accept OEM/ODM

 

Plastic Round Road Stud Light for Garden color
Plastic Round Road Stud Light for Garden color

Five colors for choice: White, Amber, Red, Blue, Green

 

Plastic Round Road Stud Light Parameters

 

    Material:     PC(Japan Brand)
    Power supply:     USA Brand Flexible High Efficient Solar Panel 5V/0.4W
    Battery:     NI-MH 1.2V/600MAH or Lithium battery 3.2V/500MA
    Working model:     Blinking or Constant
Charging in daytime and working automatically at night
    LED colors:     Yellow, White, Red, Green, Blue
    Life span:    >3 Years
    Load Bearing:     20T
    Size:     φ117*23mm (φ4.61″*0.91″)
    Visual distance:     >800M
    Water poof:     IP68
    Carton Size:     2pcs/box; 60pcs/ctn; weight: 19kgs; carton size: 67.5*28*20cm
2pcs/box; 60pcs/ctn; weight: 41.49bs; carton size: 26.57″*11.02″*7.87″

 

Plastic Round Road Stud Light
Plastic Round Road Stud Light

 

Application of PC Road Stud Light B1:

♥Schools and hospitals

♥Gardens

♥Deck and Dock

♥Walking paths

♥Bridge

♥Parks and campuses

♥Roundabout

 

How to install Plastic Round Road Stud Light for Garden B1:

  1. Determine the installation location and distance, clean the surface of the Road Stud Lights, and ensure that the Road Stud Lights are installed on a flat road surface.
  2. Clean the bottom of the Road Stud Light and apply the epoxy glue evenly to the back of the stud.
  3. Press the side with glue on the road, secure the position, wait for the glue to dry out.
  4. Check within 2 hours of installation to ensure that all Road Stud Lights are properly installed and do not bend or deform due to compression.
  5. Please evacuate the installation isolation facility 6-8 hours after installing the Road Stud Lights.
info@rctraffic.com
+86 15238616235
+86 15238616235